Campagnolo Bora WTO 77 Front Wheel

Price:
AED 9,200

Most aerodynamic wheels

The rim design enables the maximum amount of aerodynamic penetration when the wind angle is between 12° and 19°, making it a thrust for triathlon athletes. The streamlined design of the central part of the hub decreases the frontal area of the component whilst the special design of the flanges favors airflow detachment. The 18-spoke elliptical cross section in the front and 21-spoke rear cross section in the rear result in a far superior rolling resistance of the cross sections compared to competitor wheels.

Smoothest rolling

The well-known CULT cup-and-cone bearing system is unrivalled in terms of smoothness. The 2-Way Fit profile allows you to mount either a clincher tire or a tubeless tire, with less rolling resistance. The C19 class allows you to mount tires from 23, 25 to 28 mm, with perfect pairing of the rim-tire system.

This construction relies on AC3™ technology to create surefooted stopping power that is reliable and potent no matter the weather conditions. All Conditions Carbon Control™, or AC3™, was developed not only to generally improve an already great braking performance but also to address one of the principle drawbacks to the carbon fiber racing rim: braking performance in the wet. Aside from the externally obvious textured design upon the brake track, the construction of the Bora™ wheels underwent some internal optimization to orient the fibers in a way to guarantee maximum integrity in the face of new input deriving from a braking surface. The highly sophisticated resin optimized by Campagnolo engineering staff to withstand higher temperatures than the Bora™’s competition and to dissipate the extreme heat produced during the braking phase.

full-carbon C19 rim
Great comfort and maximum aerodynamics for interacting with new tire standards. Extremely high lateral wheel stiffness and reactivity.

Exclusive rim printing system
rim painting no longer required. The weight is greatly reduced and the surface is free from imperfections.

Exclusive G3 spoke pattern
perfect balance of the spoke tensions on both sides of the wheel. Reduces stress, increases transversal rigidity and the transmission of power to the wheel. G3 eliminates vibrations even with "heavy" cyclists.

brake pads made especially for carbon wheelsin scope of delivery
the new blend increases the brake performance by about 40% on wet surfaces and 20% on dry surfaces without increasing the wear and tear on the pad. For a more modular and more secure stop

Spokes with aerodynamic profile
provides the maximum aerodynamic penetration. Reduces aerodynamic drag saving rider energy.

Spokes anti-rotation system
Prevents twisting, keeps the spokes in the aerodynamic position.

Aluminum hub
provides lateral stiffness and reduced weight.

Oversized flange
greater torsional stiffness and greater reactivity.

Cup and cone bearings
easy ball/bearing adjustment, reduces possible ball/bearing play, precision operation, maintains performance over time

Aluminum axle
reduces the weight of the wheel.

Quick release
Steel spine and eccentric, lever with drill lightening and aluminum die. The eccentric-closure system allows cyclist to modulate the pressure necessary for heightened sensitivity to find the proper closure for the block. Easy to use, with a material resistant to wear and tear, rust, and pressure.

          • Spokes
            • 16 steel spokes in the elliptical cross section
            • Anti-rotation technology
          • Versions and Weights
            • Bright Label
            • Only available for: 2-Way Fit: 733 gr
          • Hub
            • Black aluminium monolithic hub
            • CULT Cup-and-cone
            • Hub edge: 100 mm
            • Pivot material: aluminium
          • Rim
            • Profile height: 77 mm
            • Rim material: carbon
            • Rim cross section (H x W): 77 / 26.5 mm
            • Rim class: C19
            • AC3 technology on the braking rim
            • Water Transfer graphic
          • Tires
            • Clincher
            • Tubeless
          • Assembly
            • The Bora™ WTO 77 Wheel is entirely hand-assembled by a specialised Campagnolo® technician and is 100% checked by electronic instrumentation. This procedure ensures that every single Campagnolo® wheel offers maximum performance and reliability.

           

           

          Most aerodynamic wheels

          The rim design enables the maximum amount of aerodynamic penetration when the wind angle is between 12° and 19°, making it a thrust for triathlon athletes. The streamlined design of the central part of the hub decreases the frontal area of the component whilst the special design of the flanges favors airflow detachment. The 18-spoke elliptical cross section in the front and 21-spoke rear cross section in the rear result in a far superior rolling resistance of the cross sections compared to competitor wheels.

          Smoothest rolling

          The well-known CULT cup-and-cone bearing system is unrivalled in terms of smoothness. The 2-Way Fit profile allows you to mount either a clincher tire or a tubeless tire, with less rolling resistance. The C19 class allows you to mount tires from 23, 25 to 28 mm, with perfect pairing of the rim-tire system.

          This construction relies on AC3™ technology to create surefooted stopping power that is reliable and potent no matter the weather conditions. All Conditions Carbon Control™, or AC3™, was developed not only to generally improve an already great braking performance but also to address one of the principle drawbacks to the carbon fiber racing rim: braking performance in the wet. Aside from the externally obvious textured design upon the brake track, the construction of the Bora™ wheels underwent some internal optimization to orient the fibers in a way to guarantee maximum integrity in the face of new input deriving from a braking surface. The highly sophisticated resin optimized by Campagnolo engineering staff to withstand higher temperatures than the Bora™’s competition and to dissipate the extreme heat produced during the braking phase.

          full-carbon C19 rim
          Great comfort and maximum aerodynamics for interacting with new tire standards. Extremely high lateral wheel stiffness and reactivity.

          Exclusive rim printing system
          rim painting no longer required. The weight is greatly reduced and the surface is free from imperfections.

          Exclusive G3 spoke pattern
          perfect balance of the spoke tensions on both sides of the wheel. Reduces stress, increases transversal rigidity and the transmission of power to the wheel. G3 eliminates vibrations even with "heavy" cyclists.

          brake pads made especially for carbon wheelsin scope of delivery
          the new blend increases the brake performance by about 40% on wet surfaces and 20% on dry surfaces without increasing the wear and tear on the pad. For a more modular and more secure stop

          Spokes with aerodynamic profile
          provides the maximum aerodynamic penetration. Reduces aerodynamic drag saving rider energy.

          Spokes anti-rotation system
          Prevents twisting, keeps the spokes in the aerodynamic position.

          Aluminum hub
          provides lateral stiffness and reduced weight.

          Oversized flange
          greater torsional stiffness and greater reactivity.

          Cup and cone bearings
          easy ball/bearing adjustment, reduces possible ball/bearing play, precision operation, maintains performance over time

          Aluminum axle
          reduces the weight of the wheel.

          Quick release
          Steel spine and eccentric, lever with drill lightening and aluminum die. The eccentric-closure system allows cyclist to modulate the pressure necessary for heightened sensitivity to find the proper closure for the block. Easy to use, with a material resistant to wear and tear, rust, and pressure.

                  • Spokes
                    • 16 steel spokes in the elliptical cross section
                    • Anti-rotation technology
                  • Versions and Weights
                    • Bright Label
                    • Only available for: 2-Way Fit: 733 gr
                  • Hub
                    • Black aluminium monolithic hub
                    • CULT Cup-and-cone
                    • Hub edge: 100 mm
                    • Pivot material: aluminium
                  • Rim
                    • Profile height: 77 mm
                    • Rim material: carbon
                    • Rim cross section (H x W): 77 / 26.5 mm
                    • Rim class: C19
                    • AC3 technology on the braking rim
                    • Water Transfer graphic
                  • Tires
                    • Clincher
                    • Tubeless
                  • Assembly
                    • The Bora™ WTO 77 Wheel is entirely hand-assembled by a specialised Campagnolo® technician and is 100% checked by electronic instrumentation. This procedure ensures that every single Campagnolo® wheel offers maximum performance and reliability.

                   

                   

                  Customer Reviews

                  Be the first to write a review
                  0%
                  (0)
                  0%
                  (0)
                  0%
                  (0)
                  0%
                  (0)
                  0%
                  (0)