Tacx Neo 2T Smart T2875 Smart Trainer

Price:
AED 5,561

The NEO 2T Smart is undoubtedly the most powerful, realistic and precise Smart direct drive trainer from Tacx and even quieter than ever before.

  • Extraordinarily quiet
  • Greatly improved riding feel on inclines and sprints
  • Pedal stroke analysis via the software of your choice
  • Directly compatible with all rear wheel axles except 135x12 and 135x10

The motor has been redesigned to deliver much higher torque and provide a better indoor cycling experience and feel, especially on climbs and sprints. It still has the renowned features such as road feel, dynamic inertia and descent simulation. Pedal stroke analysis has been improved and can now be viewed with third-party apps, so you can improve your power distribution and riding performance with the software of your choice. This bike trainer is also easier to use as it is compatible with almost all rear axles.

SILENT
With the NEO 2T Smart, Tacx has revolutionized the market by creating something that was thought to be impossible: a completely silent trainer. By redesigning the internal components, silence has been significantly improved. The noise of internal air displacements is reduced even further, as are the vibrations perceived at low cadence.

POWERFUL
The new engine design significantly improves the riding experience. More power has been given to the NEO 2T's motor, which means that higher resistance levels can be generated under certain conditions, such as sprinting or at low speeds. The very powerful resistance unit is capable of simulating climbs up to 25% and sprints up to 2200 watts.

PEDAL STROKE ANALYSIS
The NEO 2T Smart is equipped with a capacitive left and right detection sensor that measures the exact position of both legs. This allows for detailed and accurate pedal stroke analysis, which you can use to improve your power distribution and riding performance. By adding standard ANT+ bike dynamics, you can analyze your pedal stroke via third-party software, for example on a Garmin Edge bike computer.

 

The familiar features of the NEO 2 Smart remain, such as Road Feel, where you experience the vibrating sensation of riding on cobblestones, gravel, and many other road surfaces (available in Tacx Films and Zwift). Or the dynamic inertia, which compensates for weight, speed and angle of incline to create a very realistic riding experience. With the descent simulation, this bike trainer can accelerate when you're going downhill. And with the unique Isokinetic and Isotonic modes, it is not only possible to train for a smooth pedal stroke, but also to improve the power of your pedal stroke by training with high power and low cadence.

MAINTENANCE-FREE
To make your indoor workout as smooth as possible, a completely maintenance-free bike trainer has been developed: No adjustments are required to train with the NEO 2T Smart. It's also the only trainer that doesn't require a calibration process because, unlike other trainers, there are no internal gears. As a result, it is able to measure your performance with incredible precision and ensure that your data is reliable and accurate. All to ensure that you can focus entirely on your workout.

INTERACTIVE
This fully interactive smart trainer measures your speed, cadence and power and can be controlled by the app of your choice. It connects wirelessly via ANT+ (FE-C) and Bluetooth in a snap to cycling apps like Tacx, Zwift or TrainerRoad. Upgrading to the latest firmware is no problem with the Tacx Utility app, so you can always take advantage of the latest improvements and features.

STAND ALONE
The intelligent electronics of the NEO 2T Smart also allow you to train stand alone without software connections. The resistance follows a progressive power curve, corresponding to cycling on a flat road. Add to that the fact that this direct drive trainer is self-sufficient and requires no external power source, and you have the ideal companion for your training camp or when you want to warm up for a race!

ADAPTER
The rear axle of the NEO 2T Smart has been redesigned to make it compatible with most bikes without the need for adapters. Just click and go! Only for 135 x 10 mm & 135 x 12 mm axles you need an additional adapter.

  • Magnets: 32 neodymium magnets
  • Electrical connection: 110-240 volts, power plug optional
  • Power indicator: multicolor LED, spotlight on the bottom
  • Connection indicator: 2 LEDs
  • Firmware upgradeable
  • Max. Power (40 km/h): 2200 W
  • Max. simulated gradient: 25%
  • Downhill simulation
  • Max. Torque: 85 Nm
  • Max. Braking force: 250 N
  • Flywheel: Virtual
  • Mass inertia: Variable up to 125 kg
  • No calibration necessary
  • Power accuracy: < 1%
  • Resistance unit: Motor
  • Wireless communication: Bluetooth & ANT+ FE-C
  • Output: pace , cadence , power
  • Readout devices: smartphone , tablet, bike computer, sports watch, computer with ANT+ antenna
  • Suitable axles: rear fork width: race 130 mm, MTB 135 mm, 142 mm x 12 mm, 148 x 12 mm. Adapters for 135 x 10 mm & 135 x 12 mm sold separately.
  • Suitable cassettes: Shimano & SRAM: 8- to 11-speed, not suitable for the Specialized SCS system, (freewheel bodies for 12-speed, SRAM XD, XD-R and Campagnolo freewheel bodies are sold separately).
  • Construction: Interactive Smart trainer direct drive with motor brake
  • Quick release axles direct drive 142x12mm
  • Monthly subscription to Tacx Premium software
  • Front wheel mount
  • Quick release for road and mountain bikes (5 mm)

  • Extraordinarily quiet
  • Greatly improved riding feel on inclines and sprints
  • Pedal stroke analysis via the software of your choice
  • Directly compatible with all rear wheel axles except 135x12 and 135x10

The motor has been redesigned to deliver much higher torque and provide a better indoor cycling experience and feel, especially on climbs and sprints. It still has the renowned features such as road feel, dynamic inertia and descent simulation. Pedal stroke analysis has been improved and can now be viewed with third-party apps, so you can improve your power distribution and riding performance with the software of your choice. This bike trainer is also easier to use as it is compatible with almost all rear axles.

SILENT
With the NEO 2T Smart, Tacx has revolutionized the market by creating something that was thought to be impossible: a completely silent trainer. By redesigning the internal components, silence has been significantly improved. The noise of internal air displacements is reduced even further, as are the vibrations perceived at low cadence.

POWERFUL
The new engine design significantly improves the riding experience. More power has been given to the NEO 2T's motor, which means that higher resistance levels can be generated under certain conditions, such as sprinting or at low speeds. The very powerful resistance unit is capable of simulating climbs up to 25% and sprints up to 2200 watts.

PEDAL STROKE ANALYSIS
The NEO 2T Smart is equipped with a capacitive left and right detection sensor that measures the exact position of both legs. This allows for detailed and accurate pedal stroke analysis, which you can use to improve your power distribution and riding performance. By adding standard ANT+ bike dynamics, you can analyze your pedal stroke via third-party software, for example on a Garmin Edge bike computer.

 

The familiar features of the NEO 2 Smart remain, such as Road Feel, where you experience the vibrating sensation of riding on cobblestones, gravel, and many other road surfaces (available in Tacx Films and Zwift). Or the dynamic inertia, which compensates for weight, speed and angle of incline to create a very realistic riding experience. With the descent simulation, this bike trainer can accelerate when you're going downhill. And with the unique Isokinetic and Isotonic modes, it is not only possible to train for a smooth pedal stroke, but also to improve the power of your pedal stroke by training with high power and low cadence.

MAINTENANCE-FREE
To make your indoor workout as smooth as possible, a completely maintenance-free bike trainer has been developed: No adjustments are required to train with the NEO 2T Smart. It's also the only trainer that doesn't require a calibration process because, unlike other trainers, there are no internal gears. As a result, it is able to measure your performance with incredible precision and ensure that your data is reliable and accurate. All to ensure that you can focus entirely on your workout.

INTERACTIVE
This fully interactive smart trainer measures your speed, cadence and power and can be controlled by the app of your choice. It connects wirelessly via ANT+ (FE-C) and Bluetooth in a snap to cycling apps like Tacx, Zwift or TrainerRoad. Upgrading to the latest firmware is no problem with the Tacx Utility app, so you can always take advantage of the latest improvements and features.

STAND ALONE
The intelligent electronics of the NEO 2T Smart also allow you to train stand alone without software connections. The resistance follows a progressive power curve, corresponding to cycling on a flat road. Add to that the fact that this direct drive trainer is self-sufficient and requires no external power source, and you have the ideal companion for your training camp or when you want to warm up for a race!

ADAPTER
The rear axle of the NEO 2T Smart has been redesigned to make it compatible with most bikes without the need for adapters. Just click and go! Only for 135 x 10 mm & 135 x 12 mm axles you need an additional adapter.

  • Magnets: 32 neodymium magnets
  • Electrical connection: 110-240 volts, power plug optional
  • Power indicator: multicolor LED, spotlight on the bottom
  • Connection indicator: 2 LEDs
  • Firmware upgradeable
  • Max. Power (40 km/h): 2200 W
  • Max. simulated gradient: 25%
  • Downhill simulation
  • Max. Torque: 85 Nm
  • Max. Braking force: 250 N
  • Flywheel: Virtual
  • Mass inertia: Variable up to 125 kg
  • No calibration necessary
  • Power accuracy: < 1%
  • Resistance unit: Motor
  • Wireless communication: Bluetooth & ANT+ FE-C
  • Output: pace , cadence , power
  • Readout devices: smartphone , tablet, bike computer, sports watch, computer with ANT+ antenna
  • Suitable axles: rear fork width: race 130 mm, MTB 135 mm, 142 mm x 12 mm, 148 x 12 mm. Adapters for 135 x 10 mm & 135 x 12 mm sold separately.
  • Suitable cassettes: Shimano & SRAM: 8- to 11-speed, not suitable for the Specialized SCS system, (freewheel bodies for 12-speed, SRAM XD, XD-R and Campagnolo freewheel bodies are sold separately).
  • Construction: Interactive Smart trainer direct drive with motor brake
  • Quick release axles direct drive 142x12mm
  • Monthly subscription to Tacx Premium software
  • Front wheel mount
  • Quick release for road and mountain bikes (5 mm)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)