- OVERVIEW
- SPECIFICATIONS
The ROX 2.0 bike computer can be positioned directly on the handlebars in a few easy steps. There is no need to mount cables or sensors.
Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on. The user-friendly operation with two buttons enables you to start a bike tour right away. You can use the SIGMA RIDE app to set your individual display views.
SEARCH & GO
“Search & Go” navigation allows you to find a specific location and navigate there. You can enter an address into the SIGMA RIDE app on your smart phone or click on a point on the map. Trail preferences (bike trails, dirt roads, paved roads, and running/hiking trails) can be set individually. The track thus created can be started directly on your ROX 2.0 or saved in the RIDE app for later.
RE-ROUTING AND TURN-BY-TURN DIRECTIONS
During navigation, the ROX 2.0 display shows the track and turn-by-turn directions. A turn arrow and an audible signal alert you to the next turn. To make sure you don’t miss a turn, the Red Circle counts down the distance to the next turn using colored bars. They become less as you get closer to the turn. If you spontaneously deviate from the suggested route, your ROX plans a new route to the destination in a flash in interaction with the SIGMA RIDE app.
TRACKS FROM THIRD PARTIES
The track navigation allows you to precisely ride a planned route. To do this, create a track in the SIGMA DATA CENTER or with a tour portal of your choice (komoot, Strava, etc.) and import it into the SIGMA RIDE app. You can then start your tour in the app and ride it right away or save it and start it later on your bike computer. This allows you to navigate your tour without a connection to your smart phone.
LARGE DISPLAY
The 2-inch high-contrast display’s dimensions and extra-large numbers are make it easy to read, even during a ride.
RED CIRCLE
The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data.
EVERYTHING AT A GLANCE
The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with two values. Current speed and time are shown continuously on the display.
E-BIKE-READY
You ride an e-bike? No problem. The ROX 2.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. You can use this list to find out if your E-BIKE is compatible with the ROX 2.0.
UP-TO-DATE
You can use the SIGMA RIDE app to collect your training data, transfer them from the ROX 2.0 to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app’s LIVE function and assessed conveniently.
BE THERE LIVE
Record your data with your bike computer and analyse them right away with the SIGMA RIDE app’s LIVE view. You can set your individual display views extremely easily while you’re riding.
STAY TUNED
Smart notifications connect you to the outside world even when you’re riding. Notifications of incoming calls and messages to your smart phone appear on your display.
PERFECTLY POSITIONED
The Overclamp Butler enables you to perfectly align your ROX 2.0 bike computer, even if you have a short stem. For instance, the bike computer can be positioned centrally above the stem at the level of the handlebars. This ensures that there is space and order on your handlebars and that you have a good overview of all values. The Butler fits on handlebars of 31.8 and 35 mm diameters.
THE CLASSIC
The classical SIGMA GPS handlebar bracket can be fixed in place without tools in a few seconds with two cable ties. This gives you a choice between installation on your handlebars or on the stem, and the device fits handlebars of all sizes.
GENERAL
-
- Dimensions (W x H x D): 44.2 x 65.9 x 17.8 mm
- Full text display with eight languages
- Waterproof in accordance with IPX7
- 2.0-inch transflective display with Red Circle
- Backlight
- Battery time up to 18 hours
- BLE and ANT+ connectivity
- Smart notifications
- E-bike-ready
- Sensors: GPS, GLONASS, ambient light sensor
TRAINING
-
- Individually adjustable sport profiles
- Six individually adjustable training views
DATA ANALY
-
- SIGMA RIDE App and SIGMA DATA CENTER
- 100-hour log memory
- .fit file format
FUNCTIONS
-
- Speed functions
- Kilometre functions
- Time functions
- E-bike functions
- Navigation functions (komoot)
The ROX 2.0 bike computer can be positioned directly on the handlebars in a few easy steps. There is no need to mount cables or sensors.
Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on. The user-friendly operation with two buttons enables you to start a bike tour right away. You can use the SIGMA RIDE app to set your individual display views.
SEARCH & GO
“Search & Go” navigation allows you to find a specific location and navigate there. You can enter an address into the SIGMA RIDE app on your smart phone or click on a point on the map. Trail preferences (bike trails, dirt roads, paved roads, and running/hiking trails) can be set individually. The track thus created can be started directly on your ROX 2.0 or saved in the RIDE app for later.
RE-ROUTING AND TURN-BY-TURN DIRECTIONS
During navigation, the ROX 2.0 display shows the track and turn-by-turn directions. A turn arrow and an audible signal alert you to the next turn. To make sure you don’t miss a turn, the Red Circle counts down the distance to the next turn using colored bars. They become less as you get closer to the turn. If you spontaneously deviate from the suggested route, your ROX plans a new route to the destination in a flash in interaction with the SIGMA RIDE app.
TRACKS FROM THIRD PARTIES
The track navigation allows you to precisely ride a planned route. To do this, create a track in the SIGMA DATA CENTER or with a tour portal of your choice (komoot, Strava, etc.) and import it into the SIGMA RIDE app. You can then start your tour in the app and ride it right away or save it and start it later on your bike computer. This allows you to navigate your tour without a connection to your smart phone.
LARGE DISPLAY
The 2-inch high-contrast display’s dimensions and extra-large numbers are make it easy to read, even during a ride.
RED CIRCLE
The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data.
EVERYTHING AT A GLANCE
The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with two values. Current speed and time are shown continuously on the display.
E-BIKE-READY
You ride an e-bike? No problem. The ROX 2.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. You can use this list to find out if your E-BIKE is compatible with the ROX 2.0.
UP-TO-DATE
You can use the SIGMA RIDE app to collect your training data, transfer them from the ROX 2.0 to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app’s LIVE function and assessed conveniently.
BE THERE LIVE
Record your data with your bike computer and analyse them right away with the SIGMA RIDE app’s LIVE view. You can set your individual display views extremely easily while you’re riding.
STAY TUNED
Smart notifications connect you to the outside world even when you’re riding. Notifications of incoming calls and messages to your smart phone appear on your display.
PERFECTLY POSITIONED
The Overclamp Butler enables you to perfectly align your ROX 2.0 bike computer, even if you have a short stem. For instance, the bike computer can be positioned centrally above the stem at the level of the handlebars. This ensures that there is space and order on your handlebars and that you have a good overview of all values. The Butler fits on handlebars of 31.8 and 35 mm diameters.
THE CLASSIC
The classical SIGMA GPS handlebar bracket can be fixed in place without tools in a few seconds with two cable ties. This gives you a choice between installation on your handlebars or on the stem, and the device fits handlebars of all sizes.
GENERAL
-
- Dimensions (W x H x D): 44.2 x 65.9 x 17.8 mm
- Full text display with eight languages
- Waterproof in accordance with IPX7
- 2.0-inch transflective display with Red Circle
- Backlight
- Battery time up to 18 hours
- BLE and ANT+ connectivity
- Smart notifications
- E-bike-ready
- Sensors: GPS, GLONASS, ambient light sensor
TRAINING
-
- Individually adjustable sport profiles
- Six individually adjustable training views
DATA ANALY
-
- SIGMA RIDE App and SIGMA DATA CENTER
- 100-hour log memory
- .fit file format
FUNCTIONS
-
- Speed functions
- Kilometre functions
- Time functions
- E-bike functions
- Navigation functions (komoot)